USBridge KVM 2.0 Standard IP KVM in its case with the 1.3-inch screen

USBridge KVM 2.0 Standard

A ready-to-use IP-KVM built on the Radxa Zero 3W in a custom case with a live screen. Comes with a pre-flashed MicroSD card with a lifetime USBridge OS license included and an HDMI capture dongle, so remote management starts as soon as you plug it in.

$117

Lifetime USBridge OS license included

  • Ships in 2–3 daysDispatched within 2–3 business days, tracked

Technical specifications

Board
Radxa Zero 3W
Processor
Rockchip RK3566, 4 Cortex-A55 cores up to 1.6 GHz
Memory
1 GB LPDDR4
Video
HDMI capture, 1080p 60 FPS, about 45 ms latency
Video encoding
H.264, H.265
Control
USB HID keyboard and mouse, gamepads, virtual drive for ISO, IMG, VDI, VMDK
Audio
Audio from the computer
Network
Onboard Wi-Fi 6 and Bluetooth. Ethernet through a USB hub with a network port (hub not included)
Remote access
USBridge Client, web interface, Tailscale P2P
Power
USB-C
Ports
USB-C 2.0 (to the computer), USB-C 3.0 (capture dongle), Micro HDMI, 8-pin header for the ATX board
Case
Custom case
Screen
1.3″ full-color IPS, 240×240 (ST7789, SPI), 3 buttons and a 5-way joystick
Dimensions with case
69×36×34 mm
MicroSD card
With USBridge KVM OS, included
System
USBridge KVM OS, Btrfs snapshots, over-the-air updates
License
Lifetime USBridge OS license included, pre-activated on the MicroSD card (no subscription)

Set up in 3 steps

ComputerUSBridge KVM 2.0USB-CWi-FiHDMIUSBRouterUSBridge Client

HDMI

HDMI cable from the computer to the video capture dongle on the KVM.

USBridge KVM 2.0 Standard wired to the HDMI capture dongle
Wiring & firmware guide on GitHub

What's in the box

  • Radxa Zero 3W (1 GB, no eMMC) in a custom enclosure
  • Built-in interactive LCD display
  • Pre-installed MicroSD card with USBridge OS and a lifetime license included (pre-activated, no subscription needed)
  • HDMI-to-USB 1080p capture dongle
  • USB-C and USB data cables set

What sets USBridge KVM 2.0 Standard apart

Ready for ATX power control

The case already has the ATX ribbon connector. Add the Power Control Board ($14.50) later for power on, forced shutdown and reset at the hardware level, through optocoupler isolation. Works with ATX, Micro-ATX and Mini-ITX motherboards.

1.3" IPS screen and 5-way joystick

The IP address, network status and system metrics are visible at a glance, right on the case. Change settings on the device itself with the joystick and three buttons, no laptop needed.

Zero-assembly kit in a custom case

No soldering, no hunting for ribbon cables, no 3D-printed case. You get a finished device: Radxa Zero 3W in a custom case with a heatsink, a pre-flashed MicroSD card and the cables you need. Take it out of the box and connect it in minutes.

Quad-core Rockchip RK3566

Radxa Zero 3W with a Rockchip RK3566: four Cortex-A55 cores up to 1.6 GHz and 1 GB LPDDR4. The hardware video encoder keeps capture smooth at 1080p 60 FPS with about 45 ms latency.

Wi-Fi 6 and Bluetooth

Onboard Wi-Fi 6 lets you place the KVM wherever there is a signal, with no cable to the router. Need a wire? Any USB hub with an Ethernet port adds it.

Btrfs snapshots and OTA updates

A Btrfs file system with instant read-only snapshots to roll back to. One-click over-the-air updates and a lifetime license with no subscription.

USBridge KVM 2.0 Standard vs. JetKVM, PiKVM V4 Mini & TinyPilot Voyager 3

Standard costs $117 and runs the same hardware and software as every KVM 2.0 kit. Here is how it compares with other IP KVMs.

JetKVM

A JetKVM alternative with 60 FPS, Moonlight and a screen

JetKVM costs about $103. For $117, USBridge KVM 2.0 Standard streams 1080p at 60 FPS, works with Moonlight, passes through gamepads, mounts ISO, IMG, VDI and VMDK images and keeps read-only Btrfs snapshots. The case has a 1.3-inch IPS screen and a joystick. Need remote power control later? Add the ATX board for $14.50.

PiKVM V4 Mini

PiKVM V4 Mini vs. USBridge KVM 2.0 Standard

PiKVM V4 Mini is a mature Raspberry Pi CM4 KVM with a strong open-source community, but it costs well over twice as much. Standard covers the everyday jobs, BIOS access, keyboard, mouse and virtual media, for $117, and adds native clients for Windows, macOS, Linux, iOS and Android, Moonlight streaming and Tailscale built in. You pay only for what you need: power control is an optional add-on.

TinyPilot Voyager 3

A TinyPilot Voyager 3 alternative for a fraction of the price

TinyPilot Voyager 3 starts at around $399 and targets IT teams with a polished web interface. Standard gives you 1080p at 60 FPS, audio, virtual media and a lifetime license with no subscription for $117, in a 69×36×34 mm case with passive cooling that runs silent.

USBridge KVM 2.0 Standard owner reviews

Your review

Rating
What you have
Not published, only for checks

By sending, you agree to the privacy policy

Frequently asked questions

Can KVM 2.0 Standard turn my computer on and off?

Not out of the box: Standard has no ATX board. The case already has the ATX ribbon connector, so you can add the Power Control Board ($14.50) later, or choose KVM 2.0 Full, which comes with the board and wires. With the board connected you can power on, power off normally or by force, and reset the computer.

Does KVM 2.0 Standard have Ethernet?

The current board revision has onboard Wi-Fi 6 and Bluetooth. For a wired connection, plug in a USB hub with an Ethernet port: almost any hub works. The hub is not included.

How do I set up the network and find the IP address?

Plug the USB-C cable into your computer: it gets a virtual USB network adapter (its own internet connection stays untouched) and the KVM is reachable at 10.55.0.1. Open http://10.55.0.1 in a browser for the pairing QR code, the direct connection link and device key, and the Wi-Fi settings. Once the KVM joins your network, its IP address is shown on the 1.3-inch screen.

Which apps can I use to control it?

Native desktop apps for Windows, macOS (Apple Silicon) and Linux, mobile apps for iOS and Android, the web client at web.usbridge.io in any browser, and any Moonlight client for low-latency 1080p 60 FPS streaming.

Can I reach it from outside my home network?

Yes. Tailscale is built in, so you can connect from anywhere without port forwarding or a static public IP.

Does it get over-the-air (OTA) updates?

Yes. USBridge KVM OS updates over the air from the client or the web interface, with no need to reflash the MicroSD card.

Is an HDMI cable included?

No. The box has the KVM in its case, the HDMI-to-USB capture dongle and USB cables. Any standard HDMI cable from the computer to the capture dongle will do.

What is the difference between Standard, Full and Low?

Standard and Full share the same case, screen, capture dongle and pre-flashed MicroSD card. Full adds the ATX board for remote power on, power off and reset. Low is the bare board with a heatsink and capture dongle, with no case or screen, for DIY setups.

Is it CE certified?

KVM 2.0 is going through CE certification for Europe now. We will publish the certificate as soon as we have it.

Is the license a subscription?

No. The USBridge KVM OS license is included with the device and lasts for life, with no subscription and no hidden fees.

How do I keep the KVM online while the host computer reboots?

The KVM takes its power from the USB-C cable to the host. When you restart or shut down the host computer, that port loses power and the KVM reboots too. To keep it online, use a USB-C power and data Y-splitter cable (also called a power/data separator).

  1. Data end into your host computer.
  2. Power end into a standard 5V USB wall charger, like a phone charger.
  3. Single end into the KVM.

These splitters cost about $3–5 on Amazon, AliExpress or at a local electronics store: search for “USB-C power and data Y-splitter”.

Use a standard 5V adapter. Do not use high-voltage USB-PD fast chargers.

Not ready to buy yet? Stay in touch.

News by email

We'll write about new devices and firmware updates.

By subscribing you accept the privacy policy. You can unsubscribe at any time: write to kvm@usbridge.io.

Discord community

Ask questions and see how others set up their KVM.

Go to Discord
Wiring & firmware guideSetup steps, first connection, SSH access and the 3D-printable case for USBridge KVM 2.0 Standard, on GitHub.